Rippa R06: the smallest Rippa mini excavator, just 747 mm wide
The Rippa R06 is our smallest excavator: 735 kg operating weight, a transport width of only 747 mm and 1.26 m digging depth. This means it fits through many garden gates and works where larger machines cannot reach. The water-cooled Kubota Z482 two-cylinder engine delivers 11.2 hp, and you operate the 8-section control valve directly by hand. The R06 is the right choice for gardens, drainage, utility trenches and small earthworks around the house.
The R06 at a glance
- Digging depth and reach: 1.26 m digging depth, 2.57 m digging radius, 2.24 m digging height and 1.57 m dump height
- Compact dimensions: 747 mm wide, 1,946 mm long and 1,594 mm high, dozer blade 690 mm wide
- Engine: Kubota Z482 with 2 cylinders, water-cooled, 11.2 hp (8.2 kW), theoretical consumption of 0.8 to 1.2 l of diesel per hour
- Hydraulics: main pump with 18 l/min, 8-section manual control valve, 9.2 kN digging force
- Weight: 735 kg operating weight with operator, 660 kg without operator
- Equipment: open operator station with armrest, mechanical quick coupler as an option
You will find all technical data above under “Specifications”.
With 1.26 m digging depth, the R06 builds drainage, digs utility and cable trenches, excavates small ponds and planting holes and prepares strip foundations for fences and garden sheds. With the dozer blade you backfill and level straight afterwards. With a hydraulic breaker and ripper it loosens hard ground and breaks up old paths.
At 747 mm wide, the R06 fits through many garden gates and narrow passages that are too tight for larger machines. The 150 mm wide rubber tracks are gentle on lawns and paving. With an unladen weight of 660 kg, it can be transported on a suitable car trailer. Our excavator transport guide explains what to look out for.
The two-cylinder Kubota diesel delivers 11.2 hp at 3,000 rpm and is water-cooled. With a theoretical consumption of 0.8 to 1.2 litres per hour, a full 5-litre tank lasts a calculated four to six hours. Spare parts for the engine and hydraulics can be found under spare parts for the R06.
We offer buckets in several widths, an auger, a hydraulic breaker and a ripper for the R06. The attachments also fit the R10 ECO, the R13 PRO and the R15 ECO. Get off to an affordable start with the starter set of three attachments, 5% cheaper than buying them individually. All matching parts can be found under attachments for the R06.
We keep common spare and wear parts for the R06 in stock in Europe. Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the R06, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Do you need more digging depth or a cab? The R10 ECO digs 1.56 m deep and is available with a cab on request, while the R13 PRO reaches 2.04 m. You can compare all models under Rippa excavators and get personal advice via the contact form or on WhatsApp.
Matching attachments
These attachments fit your machine.









