Rippa R13 PRO: 2.04 m digging depth with a width of only 849 mm
The Rippa R13 PRO gets a lot out of compact dimensions: 1,320 kg operating weight, 2.04 m digging depth and an undercarriage that can be widened from 750 to 990 mm. The hydraulic quick coupler is standard, and the water-cooled Kubota D722 three-cylinder engine delivers 14 hp. This makes the R13 PRO suitable for gardens with narrow access as well as for utility trenches and foundations.
The R13 PRO at a glance
- Digging depth and reach: 2.04 m digging depth, 3.46 m digging radius, 2.91 m digging height and 1.92 m dump height
- Adjustable undercarriage: can be widened from 750 to 990 mm, with a dozer blade that adjusts from 750 to 990 mm
- Engine: Kubota D722 with 3 cylinders, water-cooled, 14 hp (10.2 kW), theoretical consumption of 1.1 to 1.5 l of diesel per hour
- Hydraulics: main pump with 32.5 l/min, 9.8 kN digging force, 105° boom swing angle
- Travel: two travel speeds up to 2.8 km/h, 26.8 kPa ground pressure
- Equipment: hydraulic quick coupler, counterweight and armrest as standard
You will find all technical data above under “Specifications”.
With 2.04 m digging depth, the R13 PRO digs foundations, utility and sewer trenches, builds drainage and ponds and excavates pits for cisterns. With the dozer blade you backfill and level straight afterwards. With an auger, hydraulic breaker, timber grab and ripper tooth it sets posts, breaks concrete, moves timber and loosens hard ground.
With the undercarriage retracted, the R13 PRO is only 849 mm wide and fits through many garden gates. On site you extend the undercarriage to 990 mm and gain stability when digging. Two travel speeds get you where you need to be quickly, and the rubber tracks are gentle on lawns and paving.
The three-cylinder Kubota diesel delivers 14 hp at 2,500 rpm and is water-cooled. With a theoretical consumption of 1.1 to 1.5 litres per hour, the 10-litre tank lasts a calculated six to nine hours. Spare parts for the engine and hydraulics can be found under spare parts for the R13 PRO.
Thanks to the standard hydraulic quick coupler, you change the bucket, auger or hydraulic breaker without leaving the operator seat. We offer buckets in several widths, an auger, a hydraulic breaker, a grapple, a fork and a ripper for the R13 PRO; they also fit the R06, the R10 ECO and the R15 ECO. Get off to an affordable start with the starter set of three attachments. All matching parts can be found under attachments for the R13 PRO.
We keep common spare and wear parts for the R13 PRO in stock in Europe. Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the R13 PRO, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Do you need a cab? Then take a look at the R15 ECO, which is available with a cab and air conditioning as options. For 2.63 m digging depth there is the R18 PRO. You can compare all models under Rippa excavators and get personal advice via the contact form or on WhatsApp.
Matching attachments
These attachments fit your machine.













