Rippa R22 PRO: the 2.5-tonne class mini excavator with cab and air conditioning
The Rippa R22 PRO is built for daily professional use: 2,439 kg operating weight, 2.29 m digging depth and 18.4 kN digging force. The cab and air conditioning are standard, the water-cooled Kubota D1105 three-cylinder engine delivers 22.9 hp, and the main pump supplies 67.2 l/min. This makes the R22 PRO suitable for civil engineering, landscaping and all jobs where power and comfort matter.
The R22 PRO at a glance
- Digging depth and reach: 2.29 m digging depth, 4.14 m digging radius, 3.76 m digging height and 2.50 m dump height
- Adjustable undercarriage: track width from 1,300 to 1,500 mm, 250 mm wide rubber tracks
- Engine: Kubota D1105 with 3 cylinders, water-cooled, 22.9 hp (17.1 kW), theoretical consumption of 1.3 to 1.5 l of diesel per hour
- Hydraulics: main pump with 67.2 l/min, 9-section hydraulically piloted control valve, 18.4 kN digging force
- Equipment: cab, air conditioning and counterweight as standard, hydraulic quick coupler as an option
- Transport dimensions: 2,824 mm long, 1,540 mm wide and 2,361 mm high
You will find all technical data above under “Specifications”.
With 2.29 m digging depth and 4.14 m digging radius, the R22 PRO digs construction pits, foundations and sewer trenches and lays supply lines. Thanks to its 2.50 m dump height, it loads tippers and trailers. With a hydraulic breaker, timber grab, ripper tooth and mulcher it breaks concrete, moves timber, loosens soil and mulches scrub.
The enclosed cab with air conditioning protects you from heat, cold and rain, so you can work comfortably all year round. The joysticks operate a 9-section hydraulically piloted control valve and allow precise control. Two travel speeds up to 2.8 km/h get you across the site quickly.
The three-cylinder Kubota diesel delivers 22.9 hp at 3,000 rpm and is water-cooled. With a theoretical consumption of 1.3 to 1.5 litres per hour, the 28-litre tank lasts a calculated 18 to 21 hours. Spare parts for the engine and hydraulics can be found under spare parts for the R22 PRO.
The R22 PRO has its own attachments: buckets, auger, hydraulic breaker, grapple, fork and ripper, plus a mulcher for scrub. Get off to an affordable start with the starter set for the R22 PRO: three attachments, 5% cheaper than buying them individually. All matching parts can be found under attachments for the R22 PRO.
With 2,439 kg operating weight and a width of 1,540 mm, you transport the R22 PRO on a suitable trailer with a maximum gross weight of 3.5 t. Our excavator transport guide explains what to consider regarding the towing vehicle and load securing.
We keep common spare and wear parts for the R22 PRO in stock in Europe. Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the R22 PRO, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Do you need a lighter machine with a narrower undercarriage? Then take a look at the R18 PRO. For 2.83 m digging depth and a standard hydraulic quick coupler there is the R32 PRO. You can compare all models under Rippa excavators and get personal advice via the contact form or on WhatsApp.
Matching attachments
These attachments fit your machine.













