Rippa R32 PRO: 2.83 m digging depth and load-sensing hydraulics in the 3.5-tonne class
The Rippa R32 PRO is our mini excavator for demanding earthworks in the 3.5-tonne class: 3,371 kg operating weight, 2.83 m digging depth and 27 kN digging force. The load-sensing hydraulics with 99 l/min provide power exactly where it is needed, and the water-cooled Kubota V1505 four-cylinder engine delivers 22.9 hp. Cab, air conditioning and hydraulic quick coupler come as standard.
The R32 PRO at a glance
- Digging depth and reach: 2.83 m digging depth, 4.83 m digging radius, 4.56 m digging height and 3.18 m dump height
- Engine: Kubota V1505 with 4 cylinders and 1.5 l displacement, water-cooled, 22.9 hp (17.1 kW), theoretical consumption of 1.3 to 1.5 l of diesel per hour
- Hydraulics: load sensing, main pump with 99 l/min, 9-section hydraulically piloted control valve, 27 kN digging force
- Undercarriage: 300 mm wide rubber tracks, 36 kPa ground pressure, two travel speeds up to 2.8 km/h
- Equipment: cab, air conditioning, hydraulic quick coupler and counterweight as standard
- Transport dimensions: 2,921 mm long, 1,550 mm wide and 2,485 mm high
You will find all technical data above under “Specifications”.
With 2.83 m digging depth and 4.83 m digging radius, the R32 PRO digs construction pits and basements, lays sewer and supply lines and works in road construction and civil engineering. Thanks to its 3.18 m dump height, it loads tippers and skips. With a hydraulic breaker, timber grab, ripper tooth and mulcher it breaks concrete, moves timber, loosens soil and mulches scrub.
The load-sensing hydraulics adapt the pump flow to demand. This means several movements run smoothly at the same time, and the engine works only as hard as the job requires. The main pump delivers up to 99 l/min, and the 9-section hydraulically piloted control valve allows precise control.
The four-cylinder Kubota diesel with 1.5 litres displacement delivers 22.9 hp at 2,300 rpm and is water-cooled. With a 45-litre tank and a theoretical consumption of 1.3 to 1.5 litres per hour, you work a calculated 30 to 34 hours without refuelling. Parts for the Kubota V1505 can be found under spare parts for the R32 PRO.
The R32 PRO has its own attachments: buckets, auger, hydraulic breaker, grapple, fork and ripper, plus a mulcher for scrub. Thanks to the standard hydraulic quick coupler you change them particularly quickly. Get off to an affordable start with the starter set for the R32 PRO, 5% cheaper than buying the attachments individually. All matching parts can be found under attachments for the R32 PRO.
With 3,371 kg operating weight, the R32 PRO is too heavy for a car trailer with a maximum gross weight of 3.5 t. For transport you need a larger trailer or a lorry. Our excavator transport guide explains what matters.
We keep common spare and wear parts for the R32 PRO in stock in Europe, including for the Kubota V1505 engine. Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the R32 PRO, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Do you need a lighter machine that fits on a 3.5 t trailer? Then take a look at the R22 PRO. For 3.79 m digging depth and large-scale earthmoving there is the R57. You can compare all models under Rippa excavators and get personal advice via the contact form or on WhatsApp.
Matching attachments
These attachments fit your machine.













