Rippa R57: our largest mini excavator with 3.79 m digging depth for large-scale earthmoving
The Rippa R57 is the largest excavator in the Rippa range: 5,792 kg operating weight, 3.79 m digging depth and 6.16 m digging radius. The water-cooled Kubota V2607 four-cylinder engine delivers 47.6 hp (35 kW), and the load-sensing hydraulics supply up to 149.6 l/min. Cab, air conditioning, armrest and counterweight are standard. This makes the R57 the machine for civil engineering, road construction and large construction pits.
The R57 at a glance
- Digging depth and reach: 3.79 m digging depth, 6.16 m digging radius, 5.81 m digging height and 4.08 m dump height
- Engine: Kubota V2607 with 4 cylinders and 2.6 l displacement, water-cooled, 47.6 hp (35 kW) at 2,200 rpm
- Hydraulics: load sensing, main pump with 149.6 l/min, 8-section hydraulically piloted control valve, 32 kN digging force
- Travel: two travel speeds up to 3.8 km/h, 35% gradeability, 35.4 kPa ground pressure
- Equipment: cab, air conditioning, armrest and counterweight as standard, bucket with 0.175 m³
- Transport dimensions: 4,715 mm long, 1,885 mm wide and 2,498 mm high
You will find all technical data above under “Specifications”.
With 3.79 m digging depth and 6.16 m digging radius, the R57 digs construction pits, basements and deep sewer trenches. Thanks to its 4.08 m dump height, it loads lorries and tippers quickly, and with the 1.88 m wide dozer blade you backfill and level large areas. This makes it suitable for civil engineering, road construction, site development and, with the hydraulic breaker, demolition work too.
The load-sensing hydraulics adapt the flow to demand. This means the boom, dipper arm and swing drive run smoothly at the same time, and the engine works only as hard as the job requires. With up to 149.6 l/min and 32 kN digging force, the R57 has plenty of reserves for heavy soil.
The four-cylinder Kubota diesel with 2.6 litres displacement delivers 47.6 hp at 2,200 rpm and is water-cooled. You will find all further engine data in the specifications. You can obtain spare parts for the R57 through your partner dealer or via our contact form.
The R57 data sheet lists a hydraulic breaker, timber grab, rake and ripper tooth as options. We clarify which attachment suits your application and what it costs in your personal quote. For the smaller models, you will find our range under attachments for excavators.
The enclosed cab with air conditioning and armrest protects you from heat, cold and rain, so you can get through long working days in comfort. With two travel speeds up to 3.8 km/h and 35% gradeability, the R57 makes good progress even on uneven sites.
With 5,792 kg operating weight and a width of 1,885 mm, you transport the R57 on a low-loader or lorry; a car trailer is not sufficient. Our excavator transport guide explains what matters when transporting it.
Use “Request a quote” to receive a personal quote for the R57, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Do you need a smaller machine that is easier to transport? Then take a look at the R32 PRO with 3,371 kg and 2.83 m digging depth. You can compare all models under Rippa excavators and get personal advice via the contact form or on WhatsApp.