Rippa RL06: the compact wheel loader with a standard or telescopic lift arm
The Rippa RL06 is a compact wheel loader for the yard, stable and building site: 1,620 kg operating weight, 300 kg rated payload and a width of only 1,162 mm. You choose between a standard and a telescopic lift arm, the hydraulic quick coupler is standard, and the water-cooled Kubota D1105 three-cylinder engine delivers 22.9 hp. As a yard loader, it clears, loads and transports all year round.
The RL06 at a glance
- Loading and lifting: 300 kg rated payload, up to 600 kg payload, 3.38 m lifting height and 2.06 m dump height
- Lift arm: either a standard or a telescopic lift arm, bucket with 0.23 m³ and 1,162 mm width
- Engine: Kubota D1105 with 3 cylinders, water-cooled, 22.9 hp (17.1 kW), theoretical consumption of 1.3 to 1.5 l of diesel per hour
- Hydraulics: travel pump with 96 l/min, work pump with 42 l/min, 4-section control valve, 20 MPa working pressure
- Manoeuvrable: 2,400 mm turning radius, 1,250 mm wheelbase, up to 8 km/h
- Equipment: hydraulic quick coupler and counterweight as standard, cab and air conditioning as options
You will find all technical data above under “Specifications”.
The RL06 loads feed, bedding, soil and bulk material, mucks out stables, clears yards and loads trailers. With pallet forks it moves pallets and bales, with the sweeper it cleans surfaces, and with the 4-in-1 bucket it levels, grabs and loads with a single attachment. For demolition work there is a hydraulic breaker.
The standard lift arm is the robust solution for daily loading and clearing. With the telescopic lift arm you gain height and reach, for example when stacking bales or loading high-sided trailers. You will find the lifting height of up to 3.38 m in the specifications.
The three-cylinder Kubota diesel delivers 22.9 hp at 3,000 rpm and is water-cooled. With a theoretical consumption of 1.3 to 1.5 litres per hour, the 15-litre tank lasts a calculated ten to eleven hours. Spare parts for the engine and hydraulics can be found under spare parts for the RL06.
Thanks to the standard hydraulic quick coupler, you change attachments without leaving the operator seat. In the shop you will find the 4-in-1 bucket, pallet forks and a thumb grapple for the RL06; according to the data sheet, a sweeper and a hydraulic breaker are also available as options. All matching attachments can be found under attachments for the RL06.
The RL06 is available with an open operator station or with a cab, and with air conditioning on request. The cab protects against wind, rain and cold and pays off if you work outdoors all year round.
We keep common spare and wear parts for the RL06 in stock in Europe. Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the RL06, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
The RL06 runs on four large tyres and is suited to longer distances across the yard and open ground. A skid loader turns on the spot and has the advantage in very tight spaces; you will find our models under Rippa skid loaders. You can find all information on the RL06 under Rippa wheel loaders and get personal advice via the contact form or on WhatsApp.
Matching attachments
These attachments fit your machine.