Rippa RD06: the tracked dumper with 350 kg payload
The Rippa RD06 is a compact tracked dumper for gardening, construction and landscape maintenance: 473 kg operating weight, 350 kg rated payload and a 0.27 m³ skip. You choose between a fixed tipper skip and a hydraulically lifting skip. The air-cooled Bailitong XR2100 petrol engine delivers 13.6 hp, and the rubber tracks carry the material even over soft ground.
The RD06 at a glance
- Skip and payload: 0.27 m³ skip capacity, 350 kg rated payload, either a fixed tipper skip or a hydraulically lifting skip
- Compact dimensions: 1,625 mm long, 780 mm wide and 1,200 mm high
- Engine: Bailitong XR2100 with 1 cylinder, air-cooled, petrol, 13.6 hp (8.4 kW), theoretical consumption of 0.8 to 1.2 l per hour
- Travel: two travel speeds up to 4 km/h, 30% gradeability
- Tracked undercarriage: 180 mm wide rubber tracks, only 19.6 kPa ground pressure
- Hydraulics: two pumps with 14.4 l/min each, 15 l hydraulic oil tank
You will find all technical data above under “Specifications”.
The RD06 transports soil, gravel, sand, concrete, stones and green waste over distances where a wheelbarrow becomes too much effort. It complements an excavator: the excavator digs, the dumper hauls the material away. It brings its load to where it is needed even across lawns, slopes and narrow paths.
The fixed tipper skip is the simple solution for tipping at ground level. The hydraulically lifting skip also raises the material before tipping. We are happy to discuss with you which version suits your application.
The air-cooled Bailitong XR2100 single-cylinder petrol engine delivers 13.6 hp at 3,600 rpm. It does not need diesel and runs on standard petrol. With a theoretical consumption of 0.8 to 1.2 litres per hour, the 4-litre tank lasts a calculated three to five hours. Spare parts can be found under spare parts for the RD06.
The 180 mm wide rubber tracks spread the weight so well that the ground pressure is only 19.6 kPa. This allows the RD06 to drive over lawns and soft ground without leaving deep ruts. At 780 mm wide, it fits through garden gates and narrow passages.
Maintenance is easiest at your Rippa partner dealer – then it is documented straight away. You order spare parts directly in the shop. In the Rippa Owners Club you register your machine and collect points for spare parts and maintenance.
Use “Request a quote” to receive a personal quote for the RD06, free of charge and without obligation. Alternatively, reserve it via Click & Collect for a 300 € deposit, which is credited in full against the purchase price. You collect it from a partner dealer near you and receive a briefing. Within the EU we deliver in 3–10 days, and the machine comes with a 24-month warranty from handover.
Together with an excavator, you complete earthworks in a single pass: dig, load, haul away. You can find suitable models under Rippa excavators, all information on the RD06 under Rippa dumpers and personal advice via the contact form or on WhatsApp.